TUBE PUMPS
TUBE PUMP PRINCIPLE <- Click here for a complete explanation of this product
We have designed high quality pump which could transfer materials which other pumps (water pump, slurry pump, etc) could not handle. Our pumps have more than 20 times endurance than traditional pumps.
| KB Series |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
 | |
|
|
|
| KM-Series |
|
|
| |
|
|
|
|
KB-Series use for tube has NR , NBR material and others material. in addition we have NR , NBR , and others material for foods too
Food hygiene
KB-Series :
About the tube for foods , MHW it has NR , NBR and it has white material and black material (Ministry of Health and Welfare notification 85 approval in Japan)
KM-Series :
About the tube for foods , FDA it has elastomer material.
(American Food and Drug Administration approval) |
USAGE
【Chemical Engineering】
ALKALI LIQUID, WHET LIQUID, LATEX, SOAP LIQUID, ADHESIVE, SODIUM HYDROXIDE, INK, PAINT, GLUE, CLEAM, A SELECTION PASTE, SULFURIC ACID, ALCOHOL, ACETIC ACID, NITRIC ACID, HYDROCYANIC ACID CYANIDE, BICARBONATE, SULFUR DIOXIDE, A SELECTION BATH, SLUDGE, SLURRY, RUNOFF OIL ETC.
【Food】
MISO, MINCED MEAT, BUILT-IN MATERIALS, DEHYDRATED CAKE, A PIECE OF KOMJAK, CUT VEGETABLE, CHOCOLATE, PULPY JUICE, SAUSAGE, SCRAP, SALT WATER, CREAM, SUGAR LIQUID.
【Seafood】
RAW SHRIMP, CUTTLEFISH, OCTPUS, SARDINE, LAVER, GOLDFISH, SMALL FISH(TRANSFERING IN A CONDITION WITH ALIVE FISH IS POSSIBLE).
【Construction Mineral】
RAW CONCRETE, MORTAR, CEMENT MILK, CLAY, PLASTER SLURRY, MINERAL SLURRY, CERAMIC, CERAMIC SLURRY, CONSTRUCTIONPAINTING MATERIAL, SLUDGE, THE SEA RED SLUDGE.
【Others】
PULP COUNTER, USED PAPER, PAPER SLUDGE, FIBRE SLUDGE, METAL SLUDGE.
【Drainage Treatment】
STOCKBREEDING DRAINAGE AND SLUDGE, FISHERY PROCCESSING DRAINAGE AND SLUDGE, FOOD DRAINAGE AND SLUDGE.
STANDARD SPECIFICATION
STANDARD SPECIFICATION |
OUT OF STANDARD SPECIFICATION |
|
Model |
Point of a Turn
ℓ / rev |
Standard Blowing Out Volume
ℓ / min |
Output of electric Machine, Standard |
Maximum Pressure
(max.) bar |
Maximum
Inhalation Pressure
KPa (mmHg) |
Maximum
Discharge Pressure
Mpa |
Maximum discharge Volume
Pum Rotating Figure |
Ø DISCHARGE VOLUME WILL BE DEPEND ON THE CONDITIONS OF NORMAL TEMPERATURE AND THE PURITY
OF WATER.
Ø STANDARD VOLTAGE OF MOTOR IS 200V., THAT CAN CHANGE FOR SPECIAL SPECIFICATION.
Ø IF YOU NEED TO CHANGE POWER OR DISCHARGE VOLUME OF STANDARD. PLEASE LET US KNOW.
Ø WE ARE USING STANDARD TUBE (NR). IF YOU NEED ANY OTHER MATERIAL AS (NBR) TUBE ETC., PLEASE LET US KNOW.
Ø IF YOU NEED NON-GEARSHIFT PUMP, PLEASE CONTACT US.
Ø FILL AND SEND OUR QUESTIONNAIRE SHEET, OUR EXPERENCED STUFF WILL BE READY TO ANSWER YOU ANY OF QUESTIONS.
Ø WE DESIGN PUMPS FOR ALL YOUR EXPECTATIONS.
***THANK YOU FOR CONTACT WITH US. |
KB-12 |
0.05 |
1.55ℓ/ 31rpm |
60W |
7 |
-99 (740) |
1.5 |
3 ℓ/ 60rpm |
KB-19 |
0.12 |
4.2ℓ/ 35rpm |
0.2Kw |
9 |
-99 (740) |
1.5 |
7 ℓ/ 60rpm |
KB-25-1 |
0.25 |
8.75 ℓ/ 35rpm |
0.4Kw |
9 |
-100 (750) |
2.0 |
15 ℓ/ 60rpm |
|
|
|
|
|
|
|
|
KB-25-2 |
0.3 |
10.5 ℓ/ 35rpm |
0.4Kw |
9 |
-100 (750) |
2.0 |
18 ℓ/ 60rpm |
KB-32 |
0.77 |
26.9 ℓ/ 35rpm |
1.5Kw |
10 |
-101 (760) |
2.5 |
46 ℓ/ 60rpm |
KB-38 |
1.0 |
35 ℓ/ 35rpm |
1.5Kw |
10 |
-101 (760) |
2.5 |
55 ℓ/ 60rpm |
KB-42 |
1.26 |
44.1 ℓ/ 35rpm |
2.2Kw |
10 |
-101 (760) |
2.5 |
69 ℓ/ 60rpm |
KB-50-1 |
1.75 |
61.2 ℓ/ 35rpm |
3.7Kw |
10 |
-101 (760) |
2.5 |
87 ℓ/ 60rpm |
KB-50 |
2.07 |
78.6 ℓ/ 38rpm |
3.7Kw |
10 |
-101 (760) |
2.5 |
103 ℓ/ 60rpm |
KB-65 |
4.0 |
120 ℓ/ 30rpm |
3.7Kw |
8 |
-101 (760) |
2.5 |
200 ℓ/ 60rpm |
KB-75 |
6.1 |
200 ℓ/ 33rpm |
5.5Kw |
7 |
-101 (760) |
2.5 |
288 ℓ/ 60rpm |
KB-85 |
8.16 |
250 ℓ/ 31rpm |
5.5Kw |
6 |
-101 (760) |
2.5 |
367 ℓ/ 60rpm |
KB-100 |
13.8 |
414 ℓ/ 30rpm |
7.5Kw |
5 |
-101 (760) |
2.5 |
552 ℓ/ 60rpm |
KB-125 |
40.0 |
1200 ℓ/ 30rpm |
8.5Kw |
5 |
-101 (760) |
1.5 |
1600 ℓ/ 60rpm |
STANDARD TYPE MEASUREMENT TABLE (‘”K TYPE” CONNECTION IS PERTAINED WITH ONE-TOUCH JOINT & HOSE NIPPLE) |
MODEL |
Bore of Tube |
Bore of Connection |
A |
B |
C |
D |
E |
F |
G |
H |
J |
K |
L |
M |
N |
O |
P.C.D |
Weight |
KB-12 |
12Ø |
PT-½”
MALE SCREW |
222 |
221 |
228 |
46 |
147 |
96 |
185 |
160 |
12.5 |
105 |
75 |
51.5 |
48 |
88 |
|
10kg |
KB-19 |
19Ø |
PT-¾”
MALE SCREW |
262 |
220 |
371 |
96 |
165 |
110 |
200 |
150 |
25 |
200 |
182 |
27.5 |
40 |
106 |
|
18kg |
KB-25-1 |
25Ø |
40A-K |
351 |
350 |
488 |
145 |
192 |
138 |
|
|
|
|
|
79 |
75 |
137 |
233 |
32kg |
KB-25-2 |
25Ø |
40A-K |
460 |
400 |
488 |
145 |
242 |
163 |
|
|
|
|
|
79 |
75 |
137 |
283 |
47kg |
KB-32 |
32Ø |
40A-K |
1100 |
568 |
471 |
341 |
334 |
590 |
790 |
750 |
20 |
250 |
175 |
37.5 |
40 |
|
|
150kg |
KB-38 |
38Ø |
40A-K |
1100 |
568 |
471 |
341 |
334 |
590 |
790 |
750 |
20 |
250 |
175 |
37.5 |
40 |
|
|
155kg |
KB-42 |
42Ø |
50A-K |
1240 |
602 |
478 |
341 |
345 |
590 |
790 |
750 |
20 |
250 |
175 |
37.5 |
40 |
|
|
185kg |
KB-50-1 |
50Ø |
50A-K |
1193 |
646 |
478 |
341 |
362 |
590 |
790 |
750 |
20 |
250 |
175 |
37.5 |
40 |
|
|
210kg |
KB-50 |
50Ø |
50A-K |
1307 |
590 |
745 |
200 |
406 |
817 |
1050 |
970 |
40 |
400 |
360 |
20 |
95 |
|
|
270kg |
KB-65 |
65Ø |
65A-K |
1471 |
610 |
914 |
208 |
510 |
885 |
1210 |
1130 |
40 |
500 |
440 |
30 |
105 |
|
|
420kg |
KB-75 |
75Ø |
80A-K |
1610 |
696 |
1000 |
228 |
560 |
888 |
1210 |
1130 |
40 |
500 |
440 |
30 |
105 |
|
|
580kg |
KB-85 |
85Ø |
90A-K |
1745 |
710 |
1049 |
252 |
606 |
940 |
1200 |
1100 |
50 |
680 |
640 |
20 |
125 |
|
|
652kg |
KB-100 |
100Ø |
100A-K |
1860 |
720 |
1195 |
265 |
686 |
1030 |
1330 |
1230 |
50 |
680 |
640 |
20 |
125 |
|
|
850kg |
KB-125 |
125Ø |
125A-K |
2425 |
1110 |
1775 |
390 |
1100 |
1340 |
1890 |
1710 |
90 |
686 |
606 |
40 |
200 |
|
|
1950kg |
|
